Mr. Hard Water Auto Windshield Glass Sealer
Price range: $35.80 through $162.30
Mr Hard Water Auto Windshield Glass Sealer
Product Description:
Mr Hard Water Auto Windshield Glass Sealer is a durable, easy-to-apply glass sealer that protects glass surfaces, such as auto windshields, RV windshields, and commercial bus windshields, from hard water staining and dirt build-up. It also protects the windshield from the etching effects of hard water stains preserving your raw material investment. Applies quickly and easily in one step. Run-off safe!
Its €œnon-stick€ coating creates an anti-static repelling surface that fills microscopic voids preventing calcium and dirt build-up. It also prevents glass damage and makes cleaning easier.
Benefits:
- Durable. Cost Effective.
- Easy to Use. Applies with a foam applicator, microfiber towel, or absorbent sponge.
- Excellent for repelling hard water. Protects glass surface from chemical etching. Does not discolor, crack, chip, or peel.
- Makes subsequent cleaning much easier because of the “Teflon-like” coating.
- Apply with a Sealer Applicator (SEAL – 300), microfiber towel (SEAL – 340), or sponge (SEAL – 331).
Instructions:
Application: 1. Clean and dry the surface. 2. Spread and buff the sealant evenly across the surface using a soft cloth, sponge, microfiber towel, or sealant applicator taking care not to miss any spots. Apply two coats if necessary. 3. Let the sealer dry for three to five minutes until a haze appears. 4. Buff off the remaining haze by rinsing with a wet towel. Watch the water bead off! 5. Use a dry cloth to remove the remaining water from the glass surface. 6. Re-apply as needed.
Apply with a Sealer Applicator (SEAL – 300), microfiber towel (SEAL – 340), or sponge (SEAL – 331).
Coverage Rates:
- 8 oz. – 200 sq ft.
- 16 oz. – 400 sq ft.
- 1/2 Gal. – 1600 sq ft.
| Weight | 2 lbs |
|---|---|
| Dimensions | 4 × 4 × 7 in |
| Primary Use | Auto |
