Product Description:
Mr Hard Water® Marine Glass Windshield Electric Buffer Polishing Compound is comprised of 1300 nm polishing particles (50 times smaller than powder abrasives) fully suspended in deionized water, making it ready-to-use. Simply spray onto the glass or polishing pad and you’re ready to polish away light swirl marks, hard water stains, and light etching. Mr Hard Water® Marine Glass Windshield Electric Buffer Polishing Compound is an eco-friendly, all natural compound that is safe, effective, and easy-to-use. It is specifically designed for marine windshield glass polishing. It’s also ideal for sensitive glass windshield surfaces that react poorly to powder based cleaners. Apply by hand or with a polisher. Mr Hard Water® Marine Glass Windshield Electric Buffer Polishing Compound can be used with many different types of polishing pads, including steel wool, nylon, and white pads. It can also be used on the second polishing pass, removing any glass defects generated by more aggressive cleaners and compounds. To maximize the use of the material, re-wet with water from a spray bottle as the liquid dries. CAUTION: Not suitable for plastic or glass / plastic composites.
Benefits:
- Ready to use – no mixing required.
- Glass only. CAUTION: Not suitable for plastic or glass / plastic composites.
- Ideal for glass marine windshields.
- Directions: Shake well. Test in an inconspicuous place. Do not dilute or mix. Apply with a soft cloth and polish in a circular motion. Polishers: Spray 2- 3 squirts onto the glass. Polish on low speed. Let dry and wipe away, or rinse with water.
NOTE: Always start polishing with the least abrasive polishing pad possible and work your way toward more abrasive pads.
- Light Stains. Bonnets, or Foam Pads
- Medium Stains. Blue Nylon Pads
- Tough Stains. Silver (non-reusable) or Bronze (reusable) super fine 4/0 Steel Wool Pads
DESIGNED FOR USE WITH:
- Marine Glass Windshield Electric Buffer Cleaning Kit
- Mr. Hard Water Windshield Cleaning Kit
- Mr. Hard Water Windshield Drill Kit
Directions for use: Shake well. Test in an inconspicuous place. Do not dilute or mix.
Hand Application: 1. Apply with a soft cloth or microfiber towel and polish in a circular motion. 2. Let dry to a dust and wipe away, or rinse with water. 3. Apply Mr Hard Water® Marine Glass Windshield Sealer Salt & Hard Water Protector. Polishers: 1. Spray 2- 3 squirts onto the glass windshield. 2. Spray 1-2 squirts onto a soft non-abrasive polishing pad. 3. Polish on low speed (<500 RPM). 4. When material begins to dry to a dust during polishing, re-wet with water from a spray bottle. 5 Reapply compound as needed until desired result is achieved. 6. Let dry and wipe away, or rinse with water. 6. Apply Mr Hard Water® Marine Glass Windshield Sealer Salt & Hard Water Protector. POLISHING PADS: For best polishing results, use a Mr Hard Water® – Blue Nylon Polishing Pad for light to medium stains. For tough stains, use a Mr Hard Water® super fine #0000 steel wool polishing pad. Mr Hard Water® Marine Glass Windshield Cleaning Powder can be used if a more abrasive polishing compound is needed. NOTE: Not recommend on plastics, or glass / plastic composites. Do not over polish. Always follow windshield manufacturer’s maintenance instructions.
COVERAGE RATES:
|
Slurry |
Coverage Rates (sq ft.) |
|
8 oz |
25-100 |
|
1 Quart |
100-400 |
|
1 Gal |
400-1600 |
NOTE: Coverage rates depend upon degree of damage, desired result, and glass condition.
